Based in Maharashtra, India, we are one of the largest manufacturers and suppliers of EGP ELITE among our customers. It is a ready to use interior plaster. This product is a replacement of sand cement plaster and finishing plaster. It provides completeÃÂ care to your internal walls and solid background. EGP ELITE is of premium quality made through using latest technology which provides maximum satisfaction to customers. It is a long lasting and time saving product.
Easy to apply through trowel of hand application
Excellent bonding strength
Setting time initial
Setting time final
18 to 22 sft in 25kg bag
Bulk density (kg/m3)
Compressive strength (N/mm2)
Brick, block & concrete surface with normal suction background
As per buyers requirement
Direction to use of product
Fitting & plugging should be done before plastering. Opening, chasing etc. should be filled firmly before plastering.
The background to be plastered should be thoroughly brushed with broom to remove dust and loose mortar on the existing wall surface,
For ceiling it is most important that the concrete slab should be clean, dry.
All surfaces due for plastering should be dry protected from the weather and water 5-10 minutes prior to plastering for the plaster to get a proper bonding on the background.
Always mix powder to water not water to powder material should be thoroughly mixed to
insure fit is free from lump and impurities before use.
Normal consistency or water plaster ratio.
Always back-fold bag after taking out the material to keep from moisture and atmosphere
Do not add water to delay the setting time after the initial setting time is completed the material will lose its bonding properties and strength.
Paste form should be applied by using putty blade to provide a smooth finish do not apply water brush on the finished surface.
Bags should be stored in dry place and free and free from water, after using the powder from the bag the in complete bag should be tied and closed.
After complete drying (which depends on the thickness of the plaster applied) usually 3-4 days. The surface can be painted with any water soluble paint, such as emulsion paint.
Do not use dust and contamination containing pots to mix the gypsum powder
Always mix powder to water& not the water to powder
Before applying of powder kept clean of dust or loose mortar, oil to applying area.
Use tap water only to avoid defilement or contaminating
Others, Cheque, Cash in Advance (CID), Cash Advance (CA), Cash on Delivery (COD), Cash Against Delivery (CAD)